知识创造视角下客户协同产品创新投入产出研究

科研管理 ›› 2012, Vol. 33 ›› Issue (2): 122-129,155.

知识创造视角下客户协同产品创新投入产出研究

张雪^1,2, 张庆普¹

1. 哈尔滨工业大学管理学院,黑龙江哈尔滨 150001;
2. 哈尔滨商业大学管理学院,黑龙江哈尔滨 150028

收稿日期:2011-04-28 修回日期:2011-10-21 出版日期:2012-02-27 发布日期:2012-02-28
作者简介:张雪(1977-),女(汉),黑龙江人,哈尔滨商业大学管理学院(副教授),哈尔滨工业大学管理学院博士研究生,研究方向:知识管理。
张庆普(1956-),男(汉),河北人,哈尔滨工业大学管理学院(教授,博士生导师),研究方向:知识管理,知识系统工程。
基金资助:
国家自然科学基金资助项目(70901023)2010.1-2012.1;黑龙江省自然科学基金项目(G201006)2011.1-2013.12。

Input-output analysis on the customer collaborative innovationfrom the perspective of knowledge creation

Zhang Xue^1,2, Zhang Qingpu¹

1. School of Management, Harbin Institute of Technology, Harbin 150001, China;
2. School of Management, Harbin University of Commerce, Harbin 150028, China

Received:2011-04-28 Revised:2011-10-21 Online:2012-02-27 Published:2012-02-28

摘要/Abstract

摘要： 客户协同产品创新是企业纵向协同创新的重要形式,它需要客户和企业各部门人员的共同参与。客户协同产品创新过程由七个阶段组成,期间伴随着实体产品和新知识的产生。为了衡量这种新兴创新模式的投入产出效果,从知识创造的视角出发分别确定了企业与客户协同产品创新活动的投入、产出要素,并以某企业为例,为其建立投入产出分析模型,推演模型机理,演示模型应用。研究意义在于:与传统的对于企业创新成本的机械式汇总分析相比,论文根据客户协同产品创新的阶段性和动态性特点所建立的投入产出模型可以对各组成阶段之间的关联关系与互动效果给予计量,从而为客户协同产品创新决策提供新的方法与依据。

关键词: 客户协同产品创新, 协同知识创造, 投入产出模型

Abstract: Customer Collaborative Product Innovation (CCPI) is an important style of enterprise vertical collaborative innovation, which needs the co-participation of customers and staffs from different departments of enterprises. The life cycle of CCPI constitutes seven phases, in which the concrete products and a large amount of new knowledge are generated. To evaluate the input-output performance of this new emergence innovation mode, the input and output elements of CCPI are respectively determined from the viewpoint of knowledge creation. Based on the selected case enterprise, an input-output model is developed, the model theory is deducted, and model applications are demonstrated. The significance of this research is as follows: Compared with the conventional approaches that mechanically summarize the costs of enterprise innovation, the model developed by the study based on dynamic and systematic characteristics of CCPI could quantify the interaction between composing phases of CCPI, therefore provides a more scientific approach for the decision making on CCPI.

Key words: CCPI, collaborative knowledge creation, input-output model

中图分类号:

F270.7

张雪, 张庆普. 知识创造视角下客户协同产品创新投入产出研究[J]. 科研管理, 2012, 33(2): 122-129,155.

Zhang Xue, Zhang Qingpu. Input-output analysis on the customer collaborative innovationfrom the perspective of knowledge creation[J]. Science Research Management, 2012, 33(2): 122-129,155.

参考文献

[1] Seewald N., Sim H. P. R&D and customer collaboration key to boosting margins[J]. Chemical Week, 2003, 2:55. [2] Ojanen V., Hallikas J. Inter-organizational routines and transformation of customer relationships in collaborative innovation[J]. International Journal of Technology Management, 2009, 3(45):306-322. [3] Lianguan Shen, Wei Zhao, Mu jun Li, et al. A new method for customer-oriented virtual collaborative design with VRML product model . Computer Supported Cooperative Work in Design, 2007:197-206. [4] 杨育,郭波,尹胜等. 客户协同创新的内涵与概念框架及其应用研究[J]. 计算机集成制造系统, 2008, 14(5):449-059. [5] 王伟立,杨育,王明恺等. 基于RS和SVM的客户协同创新伙伴选择[J]. 计算机工程与应用, 2007, 43(29):245-248. [6] Zhang X. D, Miao C, Li Y. Z, et al. Beyond product customization: Towards a conceptual framework for collaborative customer innovation . International Conference on Computer Supported Cooperative Work in Design , 2008:973-978. [7] 张磊,王小磊,李志蜀等. 归并请求模式及其在客户协同产品创新平台中的应用[J]. 计算机集成制造系统. 2010, 3(16):513-520. [8] Miller R.E., Blair P.D. Input-Output Analysis: Foundation and Extensions[M]. New Jersey: Prentice-Hall. 1985, 10-12. [9] 张华胜,薛澜. 基于典则相关分析的制造业知识性投入与产出效率评估[J]. 中国管理科学,2003(8):62-68. [10] 赵树宽,卢时雨. 我国区域创新系统内知识存量投入产出效率测度[J]. 情报学报,2009(3):437-440. [11] 窦文章,罗娴. 知识管理:一个投入产出模型的研究[J]. 晋阳学刊,2010(5):37-43. [12] Shepherd C., Ahmed P. K. From product innovation to solutions innovation: A new paradigm for competitive advantage[J], European Journal of Innovation Management, 2000, 2(3):100-106. [13] Kaulio M. A. Customer, consumer and user involvement in product development: A frame work and a review of selected methods[J], Total Quality Management, 1998, 1(9):141-149. [14] 董艳,张大亮,徐伟青. 用户创新的条件和范式研究[J]. 浙江大学学报(人文社会科学版),2009(4):103-113. [15] 吉敏,胡汉辉. 工程咨询企业知识创造过程的ε型模型研究-以江苏电力设计院为例[J]. 科学学研究,2009(2):269-273. [16] Von H. E. Lead users: a source of novel product concepts[J]. Management Science, 1986, 32:791-805. [17] 赵宇,李兵,李秀等. 基于改进支持向量机的客户流失分析研究[J].计算机集成制造系统, 2007, 13(1):202-207. [18] 付立群. 创新——知识创造的复杂过程[J]. 硅谷,2008, 1(8):95-96. [19] 王晓磊,杨育,邢青松等. 基于FCA方法的客户协同产品创新绩效影响因素研究[J]. 科技进步与对策,2010(9):77-82. [20] 袁天波,白思俊,宫晓华. 组织知识创造障碍分析及综合系统研究[J].情报杂志,2007(11):26-28. [21] 刘飞,李世新,刘胜. 面向大批量定制的用户需求协同配置思想及其应用[J]. 机械工程学报, 2004, 40(1):109-113. [22] Sun T. L. Supporting customer-company interaction in product customization using a web-based collaborative VR environment[J]. Institute of Industrial Engineers, 2005, 22(3):35-42. [23] 张方华,陈劲. 知识创造—企业知识管理的核心[J]. 科学学与科学技术管理, 2002(10):36-39.