基于自组织的制造业绿色工艺创新系统演化

科研管理 ›› 2012, Vol. 33 ›› Issue (2): 18-25.

基于自组织的制造业绿色工艺创新系统演化

田红娜^1,2, 毕克新^1,2

1. 哈尔滨理工大学管理学院,黑龙江哈尔滨 150040;
2. 哈尔滨工程大学经济管理学院,黑龙江哈尔滨 150001

收稿日期:2011-03-09 修回日期:2011-09-08 出版日期:2012-02-27 发布日期:2012-02-28
作者简介:田红娜(1978-),女,黑龙江大庆人,管理学博士,哈尔滨理工大学管理学院副教授,哈尔滨工程大学管理科学与工程博士后,研究方向为技术创新与管理。
毕克新(1961-),男,黑龙江哈尔滨人,哈尔滨理工大学管理学院教授,哈尔滨工程大学经济管理学院教授,博士生导师,研究方向为技术创新与管理。
基金资助:
国家自然科学基金项目(71073041)"基于低碳经济的制造业绿色创新体系及知识流动研究"(2011.01-2013.12);国家自然科学基金项目(70872024)"信息化条件下制造业企业工艺创新组织、模式与机制研究"(2009.01-2011.12);中国博士后科学基金面上项目(20100480969)"低碳视角下我国制造业绿色工艺创新运行机制与演化研究"(2010.12-2011.12)。

The evolution of green process innovation system for the manufacturing industrybased on self-organization theory

Tian Hongna^1,2, Bi Kexin^1,2

1. School of Management, Harbin University of Science and Technology, Harbin 150040, China;
2. School of Economics and Management, Harbin University of Engineering, Harbin 150001, China

Received:2011-03-09 Revised:2011-09-08 Online:2012-02-27 Published:2012-02-28

摘要/Abstract

摘要： 制造业绿色工艺创新系统是一个动态的、复杂的自组织系统。利用自组织理论剖析制造业绿色工艺创新系统的演化过程,包括形成期、以"治"为主的绿色工艺创新、以"防"为主的绿色工艺创新和"防、治结合"的绿色工艺创新四个阶段。根据Logistic基本原理构建了制造业绿色工艺创新系统的自组织演化模型并进行了案例分析,力求探索中国制造业绿色工艺创新系统的演化规律。

关键词: 制造业, 绿色工艺创新, 自组织, 系统演化

Abstract: The green process innovation system in manufacturing industry is a dynamic, complex, and self-organized system. Using self-organization theory, the evolution process of green process innovation system in manufacturing industry is analyzed. The process mainly includes four stages, that is, the formation, treatment-oriented green process innovation, prevention-oriented green process innovation, and the green process innovation combining prevention with the control. Based on the Logistic elementary principle, a self-organization evolution modelis built and a case for exploring the evolution rules of green process innovation system in Chinese manufacturing industry is analyzed.

Key words: manufacturing industry, green process innovation, self-organization, system evolution

中图分类号:

F426

田红娜, 毕克新. 基于自组织的制造业绿色工艺创新系统演化[J]. 科研管理, 2012, 33(2): 18-25.

Tian Hongna, Bi Kexin. The evolution of green process innovation system for the manufacturing industrybased on self-organization theory[J]. Science Research Management, 2012, 33(2): 18-25.

参考文献

[1] 尚杰, 姜国刚, 于晓萍. 东北老工业基地循环经济发展模式研究[M]. 北京: 人民出版社, 2010:56-57.SHANG Jie, JIANG Guogang, YU Xiaoping. Development mode of circular economy in old northeast industrial base[M]. Beijing: People Press, 2010: 56-57. [2] 经济合作与发展组织. 技术创新调查手册[M]. 北京:新华出版社, 1997: 44-45.OECD. A handbook for the surveys of technology innovation[M]. Beijing: Xinhua Press, 1997: 44-45. [3] Green process activities . Fujitsu Group Sustainability Report, 2003: 27. [4] Stephen James. Technological & management innovation as partners for economic growth[J]. Innovation and Technology-Strategies and Policies, 1997, Part 1, 21-27. [5] Green process / green facilities . Fujitsu Group Sustainability Report, 2004: 31. [6] T Foster. Meeting the environmental challenge to R&D . Economist Conference on Managing R&D and Technology. London, England, 1991. [7] Concepción Jiménez-González, David J. Constable, Alan D. Curzons, Virginia L. Cunningham. Developing GSK's green technology guidance: methodology for case-scenario comparison of technologies[J]. Clean Technologies and Environmental Policy, 2002, 4(1): 44-53. [8] Maria A. Cunha-e-Sá, Ana B. Reis. The optimal timing of adoption of a green technology[J]. Environmental and Resource Economics, 2007, 36(1): 35-55. [9] Thomas Cleff, Klaus Rennings. Determinants of environmental product and process innovation[J]. European Environment, 1999, 9 (5): 191-201. [10] élisabeth Lefebvre, Louis A. Lefebvre, Stéphane Talbot. Life cycle design approach in SMEs[J]. The International Journal of Life Cycle Assessment, 2001, 6(5):273-280. [11] Manuel Frondel, Jens Horbach, Klaus Rennings. End-of-pipe or cleaner production? An empirical comparison of environmental innovation decisions across OECD countries[J]. Business Strategy and the Environment, 2007, 16(8): 571-584. [12] Irene Henriques, Perry Sadorsky. Environmental technical and administrative innovations in the Canadian manufacturing industry[J]. Business Strategy and the Environment, 2007, 16(2): 119-132. [13] Urmila Diwekar. Green process design, industrial ecology, and sustainability: a systems analysis perspective[J]. Resources, Conservation and Recycling, 2005, 44(3): 215-235. [14] Urmila M. Diwekar, Yogendra N. Shastri. Green process design, green energy, and sustainability: A systems analysis perspective[J]. Computers & Chemical Engineering, 2010, 34(9): 1348-1355. [15] Poduska, R., Forbes, R., Bober, M. The challenge of sustainable development: Kodak's response[J]. Columbia Journal of World Business, 1992, 27(3): 286-291. [16] Paul T. Anastas, Julie B. Zimmerman. Peer reviewed: Design through the 12 principles of green engineering[J]. Environmental science & technology, 2003, 37(5): 94A-101A. [17] G. Byrne, E. Scholta. Environmentally clean machining processes-a strategic approach[J]. CIRP Annals-Manufacturing Technology, 1993, 42(1): 471-474. [18] P. Sheng, V. Carey, D. Bauer, S. Thurwachter, J. Creyts, D. Bennett. Environmental planning for machining operations and system . Proceedings of the 1998 NSF Design and Manufacturing Grantees Conference. Monterrey, Mexico, 1998. [19] P. Sheng, M. Srinivasan, S. Kobayashi. Multi-objective process planning in environmentally conscious manufacturing: a feature-based approach[J]. CIRP Annals-Manufacturing Technology, 1995, 44(1): 433-437. [20] 岳文辉, 张华, 刘德顺, 刘爱军. 面向绿色制造的工艺种类选择模型及应用[J]. 湖南科技大学学报(自然科学版), 2009, 24(3):27-30.YUE Wen-hui, ZHANG Hua, LIU De-shun1, LIU Ai-jun. Process category selection model and its application for green manufacturing[J]. Journal of Hunan University of Science & Technology (Natural Science Edition), 2009, 24(3):27-30. [21] Thurston, Deborah L.. Integrating customer preferences into green design and manufacturing[J]. Journal of Industrial Technology, 1998, 2(1): 23-39. [22] S. H. Yeo, A. K. New . A method for green process planning in electric discharge machining[J]. The International Journal of Advanced Manufacturing Technology, 1999, 15(4): 287-291. [23] J. Y. Zhu, A. Deshmukh. Application of Bayesian decision networks to life cycle engineering in Green design and manufacturing[J]. Engineering Applications of Artificial Intelligence, 2003, 16(2): 91-103. [24] 刘丽, 殷国富, 周长春, 欧彦江. 基于GA-ANN的绿色产品制造工艺多目标[J]. 武汉理工大学学报, 2009, 31(14):126-129.LIU Li, YIN Guo-fu, ZHOU Chang-chun, OU Yan-jiang. Multi-objective optimization of green products manufacturing process based on GA-ANN[J]. Journal of Wuhan University of Technology, 2009, 31(14):126-129. [25] 钱学森. 论系统工程[M]. 长沙: 湖南科学技术出版社, 1982.Qian Xuesen. System engineering[M]. Changsha: Hunan Science＆Technology Press,1982. [26] Krugman Paul R. The self-organizing economy[M]. Blackwell Publisher, 1996:75-97.