基于IT驱动的制造企业工艺创新动力源研究

科研管理 ›› 2011, Vol. 32 ›› Issue (12): 17-25.

基于IT驱动的制造企业工艺创新动力源研究

李婉红¹, 毕克新^1,2, 曹霞¹

1. 哈尔滨工程大学经济管理学院, 黑龙江哈尔滨 150001;
2. 哈尔滨理工大学管理学院, 黑龙江哈尔滨 150080

收稿日期:2010-09-28 修回日期:2011-05-17 出版日期:2011-12-27 发布日期:2011-12-23
作者简介:李婉红(1978- ),女, 陕西大荔人,哈尔滨工程大学经济管理学院讲师,博士研究生,研究方向:技术管理与技术创新管理。毕克新(1961- ),男,黑龙江哈尔滨人,哈尔滨工程大学经济管理学院教授,哈尔滨理工大学管理学院教授,博士生导师,研究方向:技术创新与管理。曹霞(1975- ),女,黑龙江哈尔滨人,哈尔滨工程大学经济管理学院教授,博士生导师,研究方向:技术创新管理。
基金资助:
国家自然科学基金项目《信息化条件下制造业企业工艺创新组织、模式与机制研究》(起止时间:2009.1-2011.12;编号:70872024);国家自然科学基金项目《基于低碳经济的制造业绿色创新体系及知识流动研究》(起止时间:2011.1-2013.12;编号:71073041);中央高校基本科研业务费专项资金资助项目《技术商业化的机理、模型及政策研究》(起止时间:2010.1-2011.12;编号:HEUCF100929);高等学校博士学科点基金新教师项目《信息技术环境下制造业企业工艺创新能力测度与评价研究》(起止时间:2009.1-2011.12;编号:200802171067)。

The process innovation power sources in manufacturing enterprises based on IT driver

Li Wanhong¹, Bi Kexin^1,2, Cao Xia¹

1. School of Economics and Management, Harbin Engineering University, Harbin 150001, China;
2. School of Management, Harbin University of Science and Technology, Harbin 150080, China

Received:2010-09-28 Revised:2011-05-17 Online:2011-12-27 Published:2011-12-23

摘要/Abstract

摘要： 对于制造企业工艺创新动力源问题的研究有助于从根源上理解工艺创新这一复杂行为的产生动因,从而推动企业通过持续性工艺创新获得竞争优势。基于国内外现有研究成果,本文提出了IT驱动制造企业工艺创新产生的五个假设。在此基础上构建了IT进步、IT设备供应商、政府IT政策、IT范围经济、IT能力与工艺创新动力源关系的理论框架,并选择我国229家制造企业为研究对象,对所提假设运用结构方程模型(SEM)和AMOS17.0软件进行参数估计和模型修正。修正模型的结果表明五种IT动力源对工艺创新均具有积极的正向驱动作用,因此所提出的五个假设全部获得支持,但其驱动总效应不同,其中IT进步的驱动总效应最大,其他动力源按照驱动总效应递减顺序依次为IT范围经济、IT设备供应商、IT能力和政府IT政策。

关键词: IT驱动, 制造企业, 工艺创新, 动力源

Abstract: Studying on process innovation power sources of manufacturing enterprises could help understanding the original motivation of enterprise process innovation, which is the complex behavior, and would promote enterprises to gain competitive advantages by sustainable process innovation. Based on the current research achievements at home and abroad, five hypotheses on IT-driven process innovation in manufacturing enterprises are proposed. Then, the research framework for the relationship among IT progress, IT equipment suppliers, government IT policy, IT economic scope, and IT capabilities and process innovation's power source is constructed, and 229 manufacturing enterprises in China are chosen as the research objects. The hypotheses being proposed are estimated and modified by Structural Equation Model (SEM) together with the software of AMOS17.0. The results of the modified model show that all of the five power sources have the positive driving effect; therefore all of the five hypotheses are supported. However, the total driving effects are different for the sources, IT progress has the most significant effect, and others in the successive order of diminishing driving effect are IT economic scope, IT equipment suppliers, IT capabilities, and government IT policy.

Key words: IT driver, manufacturing enterprise, process innovation, power source

中图分类号:

F273.1

李婉红, 毕克新, 曹霞. 基于IT驱动的制造企业工艺创新动力源研究[J]. 科研管理, 2011, 32(12): 17-25.

Li Wanhong, Bi Kexin, Cao Xia. The process innovation power sources in manufacturing enterprises based on IT driver[J]. Science Research Management, 2011, 32(12): 17-25.

参考文献

[1] 张钢.企业技术创新的动力源与信息源[J].科研管理,1998,19(4):27-31. [2] 孙冰.企业自主创新动力系统的协同论解释[J]. 商业经济与管理,2008(4): 33-37. [3] Claude Sicotte, Jean Louis Denis, Pascale Lehoux.The Computer Based Patient Record: A Strategic Issue in Process Innovation [J]. Journal of Medical Systems,1998,22(6): 431-443. [4] Adrien Presley, Joseph Sarkis, Donald H. Liles.A soft- Systems Methodology Approach for Product and Process Innovation . IEEE Transactions on Engineering Management, 2000,47(3): 379-392. [5] 王伟强,许庆瑞.企业工艺创新的源与模式研究[J]. 科研管理, 1993(5): 48-54. [6] Anand Nair,Morgan Swink. Linking Internal Process Technology Development and the Use of AMT With Manufacturing Plant Performance-An Examination of Complementarities and Redundancies[J]. TRANSACTIONS ON ENGINEERING MANAGEMENT,2007,54: 742-755. [7] 吴明隆.结构方程模型-AMOS的操作及应用[M].重庆: 重庆大学出版社,2009:37-59. [8] Giovanni Dosi. Sources procedures and microeconomic effects of innovation [J]. Journal of Economic Literature, 1998,(26):1120-1171. [9] Christopher M. McDermott, Noel P. Greis, William A. Fischer. The diminishing utility of the product/process matrix: A study of the US power tool industry [J]. Int. J. Oper. Prod. Manage.,1997,17: 65-84. [10] P. Hutcheson, A.W. Pearson, D.F. Ball. Sources of technical innovation in the network of companies providing chemical process plant and equipment [J] Research Policy,1996,25(1): 25-41. [11] Nicholas S. Vonortas, Lan Xue. Process innovation in small firms: case studies on CNC machine tools[J]. Technovation,1997,17(8): 427-428. [12] John E. Ettlie, Joan D. Penner-Hahn. Adoption complexity and economies of scope for new process technology in manufacturing [J].The Journal of High Technology Management Research,1994,5(1): 19-38. [13] Marianne Broadbent, Peter Weill, Don St. Clair.The implications of information technology infrastructure for business process redesign [J]. MIS Quarterly,1999,23(2): 159-182. [14] Gautam Ray ,Waleed A. Muhanna, Jay B.Barney. Information technology and the performance of the customer service process: a resource-based analysis [J]. MIS Quarterly,2005,29(4): 625-652. [15] Rai, A., Patnayakuni, R., Patnayakuni, N. Firm performance impacts of digitally enabled supply chain integration capabilities [J]. MIS Quarterly,2006,30(2): 225-246. [16] V.Sambamurthy, Aandhi Bharadwaj, Varun Grover. Shaping agility through digital options: reconceptualizing the role of information technology in contemporary firms [J]. MIS Quarterly,2003,27 (2): 237-263. [17] Ganesh D. Bhatt. A resource-based perspective of developing organizational capabilities for business transformation [J]. Knowledge and Process Management,2000,7(2): 119-129. [18] 侯杰泰,温忠麟,成子娟.结构方程模型及其应用[M].北京: 教育科学出版社, 2004:154-161. [19] 付睿臣.制造企业信息化对技术创新能力影响及实证研究 . 哈尔滨理工大学博士学位论文, 2009:92-93. [20] MacCallum,R.C.,Browne,M.W.,Sugawara,H.M..Power analysis and determination of sample size for covariance structure modeling[J]. Psychological Methods,1996,1(2),:130-149. [21] J. Scott Long. Confirmatory factor analysis: A preface to LISREL[M].Beverly Hills,CA:Sage.,1983:37. [22] Anandhi S. Bharadwaj. A resource-based perspective on information technology and ?rm performance: an empirical investigation [J]. MIS Quarterly,2000,24(1): 169-196. [23] Eric K. Clemons, Michael C. Row. Sustaining IT Advantage: The Role of Structural Differences [J]. MIS Quarterly, September,1991,15(3): 275-292. [24] 毕克新,王晓红,李唯滨.中小企业成长新思维——技术性贸易壁垒对我国中小企业技术创新的影响与策略研究[M].北京:科学出版社,2010:200-201. [25] Brent McKnight, Nick Bontis. E-improvisation: collaborative groupware technology expands the reach and effectiveness of organizational improvisation [J]. Knowledge and Process Management,2002,9 (4): 219-227. [26] Norhayati Zakaria, Andrea Amelinckx, David Wilemon.Working together apart? Building a knowledge-sharing culture for global virtual teams [J]. Creativity and Innovation Management,2004,13(1): 15-29.